Page 23 - version

23

AP RACING 7 /4" CLUTCH COVER AP RACING 9 /2" CLUTCH COVER 4.2 DIAPHRAGM CLUTCH KIT CLUTCH
1
1
The reduced diameter of these racing Heavy duty cover to suit either the paddle 9 /2" top quality replacement, suitable for
1
clutches gives much improved acceleration or organic centre plate available with or mildly tuned road cars.
and have a far greater torque capability without centre pad depending on the CCLU103K £179-95
with the choice between twin plate for mild choice of release bearing.
race and triple plate for the ultimate race CCLU103P with pad £193-77 Replacement parts £141-42
Cover
CCLU103
car. These do need a ball race release CCLU103PP without pad £193-77 CCLU108 Plate £64-00
bearing and the centre plates are not CLU112 Thrust £30-85
1
included. AP RACING 9 /2” PADDLE CLUTCH PLATE
Suitable for hard rally/racing. Fits with a
CCLU103R Twin Plate Cover £344-20 normal 9 /2" clutch cover. BALL RACE RELEASE BEARING
1
JCCLU103R Triple Plate Cover £485-92 Designed to fit onto the original
CCLU108P £222-27 fork mechanism. These are far
AP RACING 7 /4" CLUTCH CENTRE PLATES more reliable if replacing
1
1
These sintered plates fit with the above AP RACING 9 /2” ORGANIC CLUTCH PLATE
covers. Suitable for fast road/rally. With a more the carbon thrust
progressive take up than the paddle plate.
and a must if
CCLU108T each £69-14 being used with
JCCLU108T Thin centre plate each £69-14 CCLU108A £129-96 a racing clutch.
LIGHTWEIGHT SLAVE CYLINDER CLUTCH BLEED PIPE One type fits all
Replace the standard iron cylinder with this Whether road or race, why struggle when diaphragm clutches, fits
top quality aluminium cylinder of the same this simple braided pipe will make bleeding directly onto fingers after
bore size. the clutch easy. removal of the centre pad if fitted.
Note it may rub slightly on the gearbox CCLU130 £ 18-54
tunnel. CCLU112M £95-00
NOTE. All the clutch plates listed here are Replacement parts
CLU133G £96-85 to suit the standard Jaguar input shaft YCLU112B Bearing £21-79
splines. 1 /8" x 10. Plates to suit other shafts
1
are available to order. CLUTCH ALIGNMENT TOOL
A must have tool for aligning twin or triple
plates. Metal construction for long life.
JCLU160 £30-85

+44 (0) 1543 472244 © Denis Welch Motorsport 2016