Page 40 - version

40

Open tail pipes
EXHAUSTS

Oval Tail silencer

Main silencer rear exit

MILD STEEL EXHAUSTS DOWN PIPES REAR EXIT SILENCERS
All our Mild Steel exhaust systems are To suit our manifolds and under left hand Handmade straight through design to fit
manufactured to the highest tolerances and floor silencer, to suit 60mm ID, side or rear 60mm down pipes and mount under the left
specification and are made from top quality exit silencers. Supplied as pairs. hand floor. Twin exit pipes which follow
thick mild steel. JCEXS140 Straight Port - Mild Steel - 3.0kg £198-50 through to a joint under the rear axle.
They are supplied with heat proof black JCEXS140S Straight Port - Stainless - 2.8kg £270-52 Choose from either a pair of open tail pipes,
paint on the manifolds and gloss black, JCEXS140W Wide Angle - Mild Steel - 3.0kg £198-50 twin round rear silencers or a single oval
flame proof paint on the systems. Mandrel JCEXS140WS Wide Angle - Stainless - 2.8kg £321-02 tail silencer.
bent to avoid reduced pipe diameter on the Note: To maximise the life of the silencers JCEXS127M Main - single oval
bends. on our cars we swap between components. - Mild Steel - 15.2kg £615-15
At a 108dB event such as Donington JCEXS127MS Main -single oval
NEW NOW AVAILABLE IN STAINLESS STEEL Festival we use a main silencer and open
Product - Stainless -13.0kg £1294-95
We now offer our range of exhaust parts in tail pipes, whilst at a Goodwood track day JCEXS127T Tail - single oval
high-grade T304 stainless steel. These are with a 98dB restriction we would use the - Mild Steel - 10.4kg £375-00
made to the same high standards as our main silencer along with a second tail JCEXS127TS Tail - single oval
mild steel exhausts. silencer. - Stainless - 9.0kg £898-63
Stainless steel exhausts are ideal for the When fitted to our race cars we would not JCEXS127BTS Tail - twin round
weight concious as the components are expect to have to replace or restuff a - Stainless - 6.8kg £746-46
typically lighter than the mild steel silencer for 18 months to 2 years. JCEXS127PT Open Tail Pipes
equivalent. Also a popular fitment due to All of our stainless steel silencers are - Mild Steel - 4.2kg £197-50
their, clean appearance and resistance to restuffable. JCEXS127PTS Open Tail Pipes
corrosion. Noise levels are comparable to mild - Stainless - 3.2kg £326-98
steel systems, however there may be a small
increase in resonance.

TUBULAR MANIFOLDS
These are a similar design to the original,
providing the best flow/design possible to
stay on the inside of the chassis rail, as per
FIA requirements. We stock both straight
port and wide angle head versions.
Supplied as pairs. NOTE:
JCEXS120R Straight Port - Mild Steel - 4.4kg £662-50 Our primary silencers mount under the left
JCEXS120RS Straight Port - Stainless - 4.1kg £1123-36 hand floor and require the footwell to be of
JCEXS120RW Wide Angle - Mild Steel - 5.4kg £646-00 the flat floor type.
JCEXS120RWS Wide Angle - Stainless - 5.1kg £1095-59 Galal Mahmoud co-driving with Nigel Greensall, Weights stated are approximate.
GT & Sports Car Cup, Donington 2015.
Photo: Peter Baker, Retro-Speed
Please add VAT & carriage to all prices for www.bighealey.co.uk
UK and EEC consumer sales at the current rate