Page 16 - version

16

Straight port
ENGINE

SIX

STRAIGHT

STEEL BILLET CAMSHAFTS BLANK BILLET CAMSHAFTS CAMSHAFT LUBE
Brand new, made from the best quality steel Fully finished blank billet camshaft for final Specially formulated to help lubricate
and fully heat-treated, available in various profiling and heat treatment to your camshaft and buckets on start up. Always
profiles with large base circles. To suit specification, by ourselves or your cam apply liberally to both cam and buckets
straight port heads. Gun drilled with an oil grinder. These four bolt sprocket fixings during engine build-up.
feed to each lobe and four bolt sprocket camshafts are gun drilled through their CENG966 100ml bottle £2-95
fixings. entire length. Lobe oil feed holes can then VALVES
JENG656 Fast road each £499-80 be drilled in each cam base circle as All our valves are made from one-piece
JCENG656D Full race 1 each £499-80 required after final grinding. Purchased forgings in 214N stainless steel with stellite
JCENG656 Full Race 2 each £499-80 individually. Available in steel or cast iron. tips and plasma nitrided stems for
JCENG656B Steel each £399.00
RE-GROUND CAMSHAFTS (exchange) increased life. Suitable for both leaded and
Original iron cams re-profiled, all supplied JCENG656BI Iron pair £445-00 unleaded fuel. These are made to the
with oil fed base circles and four bolt STEEL CAM FOLLOWERS lightest design using standard size
sprocket fixings. Available with a choice of 1 /8" diameter standard size bucket cam 5/16"stems and collets.
3
profiles. followers, fully heat treated steel and JCENG720S Inlet valve 1.875" each £24-00
JENG657 Fast road - exchange pair £325-00 lightweight. A direct replacement for the JCENG721S Exhaust valve 1.625" each £21-50
JCENG657 Full race 1 - exchange pair £325-00 standard item. COMPETITION HEAD STUD SET
SURCHARGE If old cams are not 4 bolt JCENG660A each £19-60 Made specifically to our design, these high
or have no oil holes pair £50-00
LARGE DIAMETER STEEL CAM FOLLOWERS tensile waisted studs give the best
CAST IRON NEW CAMSHAFTS Lightweight and fully heat treated these 1 /2" clamping force possible. Supplied as 2
1
Brand new cast iron camshafts as the diameter bucket followers are necessary dowel locating studs and 12 plain to give
originals, all supplied with oil fed large base when using race cams. They will require the cylinder head that extra location. To suit
circles and four bolt sprocket fixings. Now the cylinder head sleeves to be replaced with & without the 0.375” thick lifting bridge.
an affordable option for a brand new with larger ones. JENG760 Top Face Iron Block/Std. head
outright sale.
JCENG660 each £19-60 - no bridge £165-00
JENG657A Fast Road pair £583-00 JENG760A Through water
JCENG657A Full race 1 pair £583-00 Iron Block/Std. head. £234-95
Note. Camshafts can be supplied to any JENG760B Top Face Iron Block/Std. head
customer specified profile. - with bridge £195-00
JCENG760L Top Face Ally Block/Std. head
- no dowel, no bridge each £13-95

Please add VAT & carriage to all prices for www.bighealey.co.uk
UK and EEC consumer sales at the current rate