Page 33 - 2016 Healey Performance Catalogue

33 C L U T C H BN2 CLUTCH CROSS SHAFT NEW 100/4 RHD HYDRAULIC CLUTCH PEDAL NEW EXTENDED PUSH ROD Product Product Our reproduction of the original fits both CAD designed with the help of original Longer than standard, used in order to Left Hand and Right Hand drive. drawings to exact dimensions and control the clutch lever free play. tolerances. CCLU136 £6-25 CLU152 each £62-50 CLUTCH PIVOT SHAFT SHIMS • These certainly were not copied and CLUTCH BLEED PIPE re-copied from a 50 year old part. At 0.020” thick these shims are perfect to Whether road or race, why struggle when • Finished in a high quality stove enamelled remove excess end float in the hydraulic this simple braided pipe will make bleeding black paint. clutch arm pivot of a BN4 to BJ8. the clutch easy. • Manufactured in-house on extensive jigs CCLU130 £18-54 CBRK155A each £0-49 An addition to complement our current BN1 & 2 CLUTCH ARM range of standard pedals. Replacement parts Reproduction of standard item. CLU500H £125-00 44516 Copper washer - solid £00-10 CLU149 £165-00 CLUTCH ALIGNMENT TOOL 44516T Copper washer crushable £00-27 NEW Product HEAVY DUTY CLUTCH LINKAGE Be warned, centre plate alignment should New levers and rods together with the far be done with the root of the clutch plate superior ball joints, means this linkage gives spline not the inside diameter hence only a a much smoother drive take up. A direct splined shaft should be used! Also replacement for the original mechanical necessary when aligning twin plate linkage. clutches of course! CCLU123 BN1 – BN2 £89-95 CLU160 BN1 to BJ8 £30-85 GIRLING SLAVE CYLINDER NEW Product For long life under demanding conditions use genuine parts - British Made are best. CLU133G BN4 to BJ8 £96-85 Jeremy Welch wins John Gott Memorial race beating Anders Schildt - Racing Sweden. Silverstone 2009. Photo: www.crucialimage.org.uk +44 (0) 1543 472244 © Denis Welch Motorsport 2016