Advanced Search

MGB HALFSHAFTS

Made from brand new forgings of higher grade steel and surface treated. These are not only stronger than the original MGB Halfshafts they are lighter than any other design available. A direct replacement for the standard. To suit cars with a Banjo axle and bolt on wheels.

PLEASE NOTE: Prices stated are per item.

Magnetic Drain Plug

Magnetic Drain Plug fits most BMC Gearboxes and Axles.

CLUTCH TYPE LIMITED SLIP DIFFERENTIAL - MGB

Newly manufactured, these MGB L.S.D.'s benefit from the choice of 30/60 or 45/45 degress ramp angles and up to 6 friction plates. 

Quaife ATB DIFFERENTIAL - MGB

Quaife ATB Differential to suit all MGB and MGC applications.

HEAVY DUTY PINION NUT AND WASHER

Maintain consistent Torque on the highly stressed pionion. This nut is not only made from a higher grade steel, it also has a stiff nut action, so will not slack off over time.

Recommended for all MGB Bango axles whether road or race.

TECH TIP: Use an old nut whilst setting up the pinion pre load, once happy then install the new nut ONCE.

LSD OIL ADDITIVE

Use this MGB LSD Oil Additive to reduce the clicking noise from a clutch type MGB LSD by adding this friction modifier. One bottle is adequate for the MGB axle.

PINION SOLID SPACER

Made from high grade steel with extra length to avoid using shims in the most demanding applications. Requires machining to length.
Suitable for all MGB Bango Diffs whether road or race.

HEAVY DUTY PROP SHAFTS BOLT & NUTS

High tensile top quality bolt with correct length shank to suit this application.

A must for the most demanding power trains when used with the all metal stiff nut - suits all models.

BEARING CAP NUT & WASHER SET

Top quality heavy duty nuts with thick washers to allow correct torque to be achieved and replace the original poor quality items.

CROWN WHEEL BOLT & WASHER SET

Top quality heavy duty bolts with 12 point heads and washers to suit, allows consistent torque to be maintained on this stressed item.