Advanced Search

ALUMINIUM DYNAMO PULLEY

Cast in aluminium, these pulleys have a deeper groove to stop the fan belt jumping off at high revs and the larger diameter slows down the speed to stop the windings from over heating. To suit the C40 and C42 Lucas Dynamo.

MGB GEAR LEVER KNOB

Our MGB Gear Lever Knob is made in aluminium with a built-in overdrive switch. We supply 3 types of MGB Gear Lever Knobs: - Early 3 syncro gearboxes featured a 5/16 UNF thread, 4 syncro (66-76) have a 3/8 UNC thread whilst late (77 on) 4 syncro gearboxes have a 7/16 UNF thread.

As gearboxes may have changed over the years it's important that you check your thread type before ordering your part. 

PLUG LEAD NUMBERS

White plastic bands with black numbers to push over standard or competition 7mm plug lead when making them up.

MGB OIL PRESSURE INDICATOR LIGHT KIT

Saves expensive engine damage by attracting your attention before the oil pressure reaches zero.  Kit contains Oil Pressure Switch. mounting Tee Piece and 30.5cm (approx) diameter orange warning light. Cuts in at 20 psi (switch is adjustable).

DISTRIBUTOR CLAMPS

These are machined from aluminium and clamp the distributor more firmly resulting in less likelihood of the timing slipping. When using the Lucas 25D6 the distributor will require machining.

For other models please contact our Parts Team.

COMPETITION HT LEAD

The traditional yellow and black Lucas competition wire HT lead.

Price stated is per meter.

PLUG LEAD TERMINALS

Crimp on terminals to suit wire H.T. lead. Used for plug and coil leads.

NGK 90 DEGREE PLUG CAP

This cap has rubber seals to make it as near 100% waterproof as possible.

LUCAS SPORTS COIL

Fits all models, for road or race this is the one to have.

LUMENITION ELECTRONIC IGNITION

Lumenition is one of the most reliable ignition kits on the market. The optical system is not disturbed by reasonable distributor wear and hence will often give a small power gain over contact breakers.

The performance kit has a constant energy design to extract the extra energy at high RPM. 

Whether purchasing the standard or performance kit the correct chopper must be purchased to suit your distributor. (NEGATIVE EARTH ONLY)