Please select Product Brand or type a Keyword and click SEARCH button to find the Product you require.
Please select Car Make and Category or type a keyword or Part Number and click SEARCH button to find the part you require.
Our Heavy Duty Cylinder Head Washer is a must when using an aluminium head, although is also recommended for iron heads.
PLEASE NOTE:
- 11 washers are required for 4 Cylinder
- 16 washers are required for 6 Cylinder
Code: CENG762
Sku: CENG762 Availability: In Stock |
CENG762 |
£1.86
|
Qty
|
The very latest design using modern manufacturing techniques means this three layer all steel Competition Head Gasket is the best on the market. It has been made solely for us on dedicated tooling at considerable expense. Whether used on high compression race engines or simply to stop the constant water leaks down the distributor side of a standard engine, this is more than adequate to do the job. Being the same thickness as original it does not change the compression ratio and suiting bores up to 3.562" (90.5mm) diameter.
Available as a complete head set which includes all the gaskets you need when refitting a head, or as the steel head gasket only.
Our Competition Head Gasket can also be used up to three times.
Code: CENG401A
Sku: CENG401A Availability: In Stock |
CENG401A |
£189.95
|
Qty
|
|
Code: CENG401
Sku: CENG401 Availability: In Stock |
CENG401 |
£199.95
|
Qty
|
Finished in crackle black and highlighted with our motif. This come complete with polished Monza quick action filler cap and all fittings. Our Ribbed Aluminium Rocker Cover was designed to give extra clearance for the rocker gear, especially on engines with high-lift cams.
Code: CENG536
Sku: CENG536 Availability: In Stock |
CENG536 |
£195.00
|
Qty
|
Comprising of roller rocker arms made from aircraft specification aluminium, offset steel posts, spacers and shaft. These are fully assembled, ready to fit to the engine (the push rod holes require machining a little for clearance, and valve to block clearance should be checked). They are considerably lighter and higher ratio than the standard and therefore not only reduce valve guide wear they also give increased valve lift (1.65:1 theoretical ratio).
Code: CENG502K
Sku: CENG502K Availability: In Stock |
CENG502K |
£725.00
|
Qty
|
Code: CENG702B
Sku: CENG702B Availability: In Stock |
CENG702B |
£5.20
|
Qty
|
|
Code: CENG702A
Sku: CENG702A Availability: In Stock |
CENG702A |
£16.95
|
Qty
|
These are much stronger than the standard aluminium ones and stop the rocker shaft from flexing and fretting. The spacers hold the rockers firm, stopping them from moving up and down the shaft.
Code: CENG508
Sku: CENG508 Availability: In Stock |
CENG508 |
£135.00
|
Qty
|
We have this specially heat-treated to give longer life under high performance conditions.
Code: CENG500
Sku: CENG500 Availability: In Stock |
CENG500 |
£39.50
|
Qty
|
We have reproduced the Tappet Adjuster Screw to the original design with increased high quality 3/8"BSF thread.
Code: ENG503
Sku: ENG503 Availability: In Stock |
ENG503 |
£7.95
|
Qty
|
|
Code: ENG504
Sku: ENG504 Availability: In Stock |
ENG504 |
£0.80
|
Qty
|
Our 4 Cylinder Big Bore Manifold Gasket is manufactured from top quality materials with larger port holes.
Suitable for the 100M or Big Bore Manifolds.
Code: CENG546
Sku: CENG546 Availability: In Stock |
CENG546 |
£16.00
|
Qty
|
Protect your engine whilst it is in build, transport or storage. This thick card cover will help stop unwanted objects ending up in the ports.
Code: ENG546B
Sku: ENG546B Availability: In Stock |
ENG546B |
£4.95
|
Qty
|
In 2003 we totally revised not only the way we sell our camshafts but also the design and manufacturing. We now only sell camshafts packaged complete with followers and cam lube for assembly. There are considerable differences between new and reground cams so the decision should be taken carefully. Manufactured to the original specifications with original lobe position. The oil feed to the centre journal is as standard and the lobes are made as large as possible to reduce wear. Using the best material available for long life and fully heat treated. Now also available as a Billet Blank for final profiling and heat treatment to your specification, by ourselves or your cam grinder.
PROFILES
PLEASE NOTE: Prices include cam followers and cam lube, but not pushrods.
For a Camshaft Profile specification sheet please click the attachment below.
Code: CENG456B
Sku: CENG456B Availability: In Stock |
CENG456B |
£369.00
|
Qty
|
|
Code: SCENG456/4
Sku: SCENG456/4 Availability: In Stock |
SCENG456/4 |
£595.00
|
Qty
|
|
Code: CENG456/2
Sku: CENG456/2 Availability: In Stock |
CENG456/2 |
£595.00
|
Qty
|
|
Code: ENG456/1
Sku: ENG456/1 Availability: In Stock |
ENG456/1 |
£595.00
|
Qty
|
Cam Timing Chart 4 Cyl2024.pdf | Cam Timing Chart 4 Cyl2024.pdf | View | Download |